-
Description
Characteristic:
Adopting ARM Cortex-M3 processor and including 2.4-inch color TFT display screen.
On the basis of this suite, it can be used for secondary development, for example, it can be changed to a millivolt meter or data logger.
Comes with instructions for easy installation and operation.
Equipped with automatic/normal/single trigger modes, it is easy to capture torque waveforms.
Available rising or falling edge triggers.
The previous waveform that can be observed before triggering (negative delay).
It has digital display of waveform parameters, including frequency, period, duty cycle, MAX./MIN./AVG./Peak/virtual values.
Short circuit and open circuit detection: can help users identify welding errors.
TFT controller recognition function.
SMD has been soldered, making it more suitable for beginners in electronics.
Specifications:
Maximum real-time sampling rate: 1MSa/s
Simulated bandwidth: 0-200KHz
Sensitivity range: 5mV/div-20mV/idv
Maximum input voltage: 50Vpk (1X probe)
Input impedance: 1M ohms/20pF
Accuracy: 12 bits
Record length: 1024 points
Coupling mode: DC/AC/GND
Time base range: 500 seconds/minute -10us/minute
Trigger modes: automatic, normal, and single
Trigger position: center of buffer
Power supply voltage: DC 9V (8-10V)
Current consumption: approximately 120mA@9V
Motherboard size: 94 * 65mm/3.7 * 2.56in
Simulation board size: 65 * 47mm/2.56 * 1.85in
Screen size: 52 * 40mm/2 * 1.57 inches
Package list:
Oscilloscope * 1
Crocodile thread * 1
Adapter * 1
